China Oil Free Water Cooled Dry Vacuum Pump for Chemical and Pharmaceutical Industrial Furnace Vacuum Coating Aeronautics and Astronautics with Clean Vacuum sprocket bike shop

Item Description

 

Solution Description

Dry screw vacuum pump, is the use of a pair of screw, made in the pump shell synchronous high-pace reverse rotation of the results of the suction and exhaust and suction unit, 2 screw fine dynamic balancing correction, and is supported by bearings, is set up in the pump shell, among screw and screw has a specified hole, so the pump work, no friction in between each other, sleek managing, minimal sound, Doing work chamber without lubricating oil, therefore, dry screw pump can get rid of a whole lot of steam and a modest quantity of dust gas situations, increased limit vacuum, reduced energy usage, energy saving, servicing-free and other positive aspects.Dry Oil-Totally free Air Cooling Screw Vacuum Pump ,This is an superior and widely utilized vacuum pump at present, It is 1 of the greatest-marketing products of our organization.
 It adopts explosion-proof motor with higher configuration, It has the traits of low sounds, no oil and air pollution, clean and higher vacuum, basic and practical use, operation and maintenance, Widely used in several industries, For illustration, oil and gasoline restoration, vacuum coating, biomedicine, foods processing, single crystal furnace, vacuum forming, vacuum melting, electronic photovoltaic, semiconductor synthesis and a lot of other industries are used.
The dry oil-cost-free screw vacuum pump developed by our business is divided into air cooling and water cooling in accordance to the extraction charge, and there are several designs for you to decide on.

Our Advantages

There is no medium in the functioning chamber, which can receive a thoroughly clean vacuum.
. No clearance between rotating elements, substantial pace procedure, little total quantity.

There is no compression in the gas, suited for extraction of coagulable gas.

Can remove a lot of steam and a little quantity of dust fuel events.
. High vacuum, the ultimate vacuum up to 1 Pa.

Screw material is large energy specific content, materials density, use resistance, steady overall performance.

No friction rotating parts, reduced noise.
. Easy composition, hassle-free upkeep.
Wider variety of use: corrosive atmosphere can be employed.

No oil intake, no h2o.

Pump fuel directly discharged from the pump body, no air pollution of water, no environmental pressure, a lot more convenient fuel recovery.

It can be composed of oil-totally free unit with Roots pump and molecular pump.

 

Normal Use

——Oil and gas recovery.    ——Biological medication ——Foods Processing —— Single crystal furnace
——Vacuum forming ——Vacuum flame refining ——Digital photovoltaic. ——Semiconductor synthesis

Solution Parameters

 Air cooling   Dry screw vacuum pump

Type
(Air cooled collection)
                                                                            Standard parameters 
Pumping speed
(m3/h)
Presure restrict(Pa)  Power (kW)  revolution (rpm) Inlet caliber
(mm)
outlet caliber (mm) Pump head weight
(kg)
noise dB(A) Total dimension
(length*width*height)
(mm)
LG-10 ten ≤5 .75 2730 KF16 KF16 thirty ≤ 72 655x260x285
LG-20 20 ≤5 one.1 2840 KF25 KF25 55 ≤72 720x305x370
LG-fifty fifty ≤10 2.two 2850 KF40 KF40 ninety ≤75 920x350x420
LG-70 70 ≤30 3 2850 KF40 KF40 110 ≤75 910x390x460
LG-ninety ninety ≤30 4 2870 KF50 KF50 125 ≤80 1000x410x495

Water cooling Dry screw vacuum pump

Type                                                                             Fundamental parameters
Pumping speed
m3/h
Presure limit(Pa)  Power (kW)  revolution (rpm) Inlet caliber
mm
outlet caliber mm Cooling water volume
L/min
noise dB(A) All round dimension
(duration*width*top)
mm
LGV-180 180 five four 2900 forty forty 2 < 78 1157x375x734
LGV-250 250 five 5.five 2900 50 forty 5.5 <78 1462x417x820
LGV-360 360 five 7.five 2900 50 40 four W78 1462x455x820
LGV-540 540 five 11 2900 sixty five fifty 8 W80 1578x543x860
LGV-720 720 five fifteen 2900 eighty sixty five ten <80 1623x562x916
LGV-1100 1100 5 22 2900 one hundred eighty fourteen w 80 1866x598x1050
LG V-1800 1800 5 37 2900 a hundred and fifty 100 twenty w eighty 2092×951 x 1150

Attribute Curve

 Air cooling   Dry screw vacuum pump

Water cooling Dry screw vacuum pump

In depth Photographs

Vacuum pump is employed in the discipline of chemical plantVacuum pumps are employed in oiling equipment

Basic Manager Speech

Deeply cultivate the vacuum technology, and investigation,develop and manufacture the vacuum products to provide the very best resolution in the vacuum discipline and make the vacuum software less complicated.

Firm Profile

ZheJiang Kaien Vacuum Technologies Co., Ltd. is a substantial-tech organization integrating R & D, generation and operation of vacuum products. The organization has powerful technological pressure, superb equipment and considerate right after-product sales services. The solution production process is managed in rigid accordance with IS09001 top quality technique. It mainly creates and sells screw vacuum pump, roots pump, claw vacuum pump, runoff vacuum pump, scroll pump, drinking water ring vacuum pump, vacuum device and other vacuum techniques.

New plant plHangZhou

The firm’s products have been for a variety of meals, medication, refrigeration, drying crops and a quantity of transformer related tools producers for vacuum equipment. The goods are broadly utilised in vacuum drying and dehydration, kerosene vapor period drying, vacuum impregnation, vacuum metallurgy, vacuum coating, vacuum evaporation, vacuum concentration, oil and gasoline recovery, and many others.

Higher precision machining products

The firm cooperates with a lot of scientific investigation establishments and universities, such as ZheJiang College, China College of petroleum, ZheJiang Institute of mechanical style, and so forth.with colleges and universities to study and produce main technologies, and owns dozens of impartial mental property patents.Our technological innovation is major, the merchandise quality is stable, the merchandise has a good status in China’s domestic market, is offered all more than the country, and is exported to Europe, The usa, Africa, the Middle East and Southeast Asia,We adhering to the simple tenet of good quality, track record and services, the company requires leading-edge technology of vacuum pump as its personal obligation, and wholeheartedly serves consumers of vacuum tools software in various industries with arduous functioning frame of mind and professional functioning design.

Solution top quality wins buyer cooperation

 

In cargo

ISO 9001

Welcome to ship your requirements, we will give you with the ideal services,

offer the biggest assist!!!

US $235-7,850
/ Piece
|
1 Piece

(Min. Order)

###

Warranty: One Year
Oil or Not: Oil Free
Structure: Screw
Exhauster Method: Entrapment Vacuum Pump
Vacuum Degree: High Vacuum
Work Function: Mainsuction Pump

###

Customization:

###

Type
(Air cooled series)
                                                                            Basic parameters 
Pumping speed
(m3/h)
Presure limit(Pa)  Power (kW)  revolution (rpm) Inlet caliber
(mm)
outlet caliber (mm) Pump head weight
(kg)
noise dB(A) Overall dimension
(length*width*height)

(mm)
LG-10 10 ≤5 0.75 2730 KF16 KF16 30 ≤ 72 655x260x285
LG-20 20 ≤5 1.1 2840 KF25 KF25 55 ≤72 720x305x370
LG-50 50 ≤10 2.2 2850 KF40 KF40 90 ≤75 920x350x420
LG-70 70 ≤30 3 2850 KF40 KF40 110 ≤75 910x390x460
LG-90 90 ≤30 4 2870 KF50 KF50 125 ≤80 1000x410x495

###

Type                                                                             Basic parameters
Pumping speed
m3/h
Presure limit(Pa)  Power (kW)  revolution (rpm) Inlet caliber
mm
outlet caliber mm Cooling water volume
L/min
noise dB(A) Overall dimension
(length*width*height)

mm
LGV-180 180 5 4 2900 40 40 2 < 78 1157x375x734
LGV-250 250 5 5.5 2900 50 40 5.5 <78 1462x417x820
LGV-360 360 5 7.5 2900 50 40 4 W78 1462x455x820
LGV-540 540 5 11 2900 65 50 8 W80 1578x543x860
LGV-720 720 5 15 2900 80 65 10 <80 1623x562x916
LGV-1100 1100 5 22 2900 100 80 14 w 80 1866x598x1050
LG V-1800 1800 5 37 2900 150 100 20 w 80 2092×951 x 1150
US $235-7,850
/ Piece
|
1 Piece

(Min. Order)

###

Warranty: One Year
Oil or Not: Oil Free
Structure: Screw
Exhauster Method: Entrapment Vacuum Pump
Vacuum Degree: High Vacuum
Work Function: Mainsuction Pump

###

Customization:

###

Type
(Air cooled series)
                                                                            Basic parameters 
Pumping speed
(m3/h)
Presure limit(Pa)  Power (kW)  revolution (rpm) Inlet caliber
(mm)
outlet caliber (mm) Pump head weight
(kg)
noise dB(A) Overall dimension
(length*width*height)

(mm)
LG-10 10 ≤5 0.75 2730 KF16 KF16 30 ≤ 72 655x260x285
LG-20 20 ≤5 1.1 2840 KF25 KF25 55 ≤72 720x305x370
LG-50 50 ≤10 2.2 2850 KF40 KF40 90 ≤75 920x350x420
LG-70 70 ≤30 3 2850 KF40 KF40 110 ≤75 910x390x460
LG-90 90 ≤30 4 2870 KF50 KF50 125 ≤80 1000x410x495

###

Type                                                                             Basic parameters
Pumping speed
m3/h
Presure limit(Pa)  Power (kW)  revolution (rpm) Inlet caliber
mm
outlet caliber mm Cooling water volume
L/min
noise dB(A) Overall dimension
(length*width*height)

mm
LGV-180 180 5 4 2900 40 40 2 < 78 1157x375x734
LGV-250 250 5 5.5 2900 50 40 5.5 <78 1462x417x820
LGV-360 360 5 7.5 2900 50 40 4 W78 1462x455x820
LGV-540 540 5 11 2900 65 50 8 W80 1578x543x860
LGV-720 720 5 15 2900 80 65 10 <80 1623x562x916
LGV-1100 1100 5 22 2900 100 80 14 w 80 1866x598x1050
LG V-1800 1800 5 37 2900 150 100 20 w 80 2092×951 x 1150

Select sprocket

If you are in the market for a new sprocket, there are several factors to consider. There are two basic types of sprockets: roller sprockets and flat bore sprockets. Each has its pros and cons, so it’s important to choose the right one for your needs.sprocket

Roller sprocket

A roller sprocket is a mechanical device used to turn a rotating shaft. The size of the sprocket depends on its speed and the size of the chain. It has a wide range of applications. In addition, it is a versatile mechanical device that is an excellent choice for a variety of applications.
To understand the design of a roller sprocket, you can draw an outline on a piece of paper and draw the radius of the roller. This will help you understand how your teeth are configured. For example, if the teeth of the sprocket are round, the rollers will have a semi-circular profile. Likewise, if the roller is linear, the arc will be tangent to the base circle. This will ensure smooth movement of the rollers, while also transmitting rotational motion with high precision.
The length of the roller chain varies depending on the drive type. In adjustable center drives, the chain should be replaced at 3% elongation, while fixed center drives should be replaced at 15% elongation. You can also check the chain condition of the sprocket by pulling the chain out of the larger sprocket. If the chain is moving off the larger sprocket, it is time to replace the roller chain. Neglecting this aspect can result in damage to the sprocket.
The present invention relates to the manufacture of chain drive sprockets with a backlash-free mechanism. This is achieved by providing a center-to-center offset between the sprocket and roller connection lines. The resulting chain drive is backlash-free and allows full contact between the rollers and teeth.
Roller sprockets are critical components to ensure maximum efficiency and uptime. Its dimensions—bore bore, hub diameter, and through-hole length—are important. Additionally, the size of the roller sprockets varies according to the chain pitch, which is the distance between the centers of the roller pins.
sprocketRoller sprockets can be made of different materials, depending on their purpose. Most sprockets are made of metal or reinforced plastic. Some have bosses, some are shaped like wheels. Sprockets can be made of easily machined steel or resin. Different types of chains will engage different sprockets.
In addition to being used to mesh with chain drives, roller sprockets come in many different styles and bores. They are versatile and are often used with roller chains. Some are made of 1045CD carbon steel and have hardened teeth. Additionally, they are fully ANSI B29.1 compliant and some are manufactured for OEMs and aftermarket suppliers.

Flat hole sprocket

Flat bore sprockets are sprockets that are not specially machined. Flat bore sprockets do not have set screws, keyways or other special features. These features often require additional machining prior to installation. An important thing to keep in mind when buying a flat bore sprocket is the maximum bore. This refers to the maximum size that can be drilled without compromising structural integrity. Such measurements are usually listed in supplier directories.
Flat bore sprockets are available with standard bore or metric bore. Sprockets are used with specific chains. All chains are manufactured to a standard called “pitch”. The pitch is the distance from the center of one needle to the center of the next needle.sprocket

Steel split sprocket

Steel split sprockets can be used in a variety of industrial applications. These sprockets can be used in a range of applications, from forestry and mining to food and plastics processing. These types of sprockets are available in a variety of bores, tooth counts, and sprocket styles. Some types are also abrasion resistant.
There are several manufacturers that offer steel split sprockets. Made from high carbon steel, they are available in split, solid and removable rim versions. These sprockets are also suitable for hydraulic or pneumatic systems. Some manufacturers also offer service and support, including life cycle performance analysis, customer part numbers, and barcodes.
Split sprockets are ideal for applications where the drive shaft is large and multiple sprockets are mounted on the same shaft. For example, large conveyor chain sprockets may require the use of a crane to install and may result in increased downtime. Split sprockets also make installation in tight spaces easier. They can also be easily assembled without disassembling the shaft assembly.
Split sprockets are available in stock and custom sizes. small Stainless steel sprockets are also available, as are split flat top conveyor sprockets. They are commonly used in conveyors and robotic systems. Certain types of sprockets are suitable for specific applications, including woodworking, food processing, and woodworking.
Dimensions of split sprockets may vary by application. For example, split hub sprockets can range from one-half inch to one-tenth of an inch. Additionally, split hub sprockets have bolt circle diameters ranging from three-quarters to thirteen inches.

China Oil Free Water Cooled Dry Vacuum Pump for Chemical and Pharmaceutical Industrial Furnace Vacuum Coating Aeronautics and Astronautics with Clean Vacuum     sprocket bike shopChina Oil Free Water Cooled Dry Vacuum Pump for Chemical and Pharmaceutical Industrial Furnace Vacuum Coating Aeronautics and Astronautics with Clean Vacuum     sprocket bike shop
editor by czh2022-11-25

Sprocket

As one of the sprocket manufacturers, suppliers, and exporters of mechanical products, We offer sprockets and many other products.

Please get in touch with us for details.

Manufacturer supplier exporter of the sprocket.

Recent Posts